PCB Instant Quote
Board Type:
X-out acceptance in Panel:
The marked "X-out" defective PCB exists in Panel.If it's unacceptable the cost will increase about 15%-15%.
*Size:
Pls Input the maximum length and width of the outline size of board. In general our outline tolerance is ±0.15mm, if you have special requirment on the tolerance, pls indicate in remark.
*pcs size
*Quantity:
Pls input the order quantity. In default setting board size below 250mm*250mm the quantity number requests multiple of 5, if the board size exceed 250mm*250mm, it’s allowed to input any request quantity.
Layers:
1 Layer: Single layer PCB, 2 Layers: Double sided PCB, 4 Layers: Four layers PCB, 6 Layers: Six layers PCB. All holes of Single layer PCB are NPTH. Double sided PCB can make PTH holes. We defaulty make circuit layer according to your Gerber file (one circuit layer make Single layer PCB). If you have special requirment (such as make Double sided craft but only one circuit layer) please choose Double sided PCB.
Layer order:
Material:
FR-4: For prototype production we defaultly use KB brand (Kingboard Laminates). Tg130-170, Thickness 0.4mm-2.4mm. For batch production there is two brands of FR-4 raw material for choosing: KB (Kingboard Laminates) and GDM (Goldenmax International Technology). Aluminium: Default Thermal Conductivity 1.0-2.0. Thickness 1.0mm-2.0mm.
*with CEM-1 & Aluminum Material only apply for single Layer
Panel Way:
*Vertical X Horizontal (default V-cutting )
Edge Position:
Edge Width:
* Min:4mm
Different Design in Panel:
We will charge extra panel costs if there are different design files in 1 PCB. If there is same design file, no extra panel cost occurs.
e.g.
Thickness:
PCB thickness: Finished board thickness. The tolerance of KB brand FR-4 material is within±10% of board thickness.
Coefficient ofperformance:
Withstand voltage:
Finished Copper(outer):
Finished Copper(inner):
Min Track/Spacing:
Min Hole Size:
Solder Mask:
Solder Mask color refers to the color of the ink covering the surface of the board as a protective layer. We regard green as default color which won’t charge extra fee. Other colors including red, yellow, blue, white, black, matt black will add extra fee.
Silkscreen:
The color of the text printed. In default setting there is white color and black color. If you have special requirment pls indicate in remark.
*By our system default setting, it will add mark like “123456S” as our manufacturing PCB identification.
Surface Finish:
It’s extra process to expose copper for solderability.
Via Process:
E-test Method:
Semi-hole:
Working Gerberfile Check:
Reports:
SMD Stencil:
Stencil Type:
Stencil Side:
Size:
Mark Point:
Quantity:
Stencil Remark:
Special Requirement
Other Special Request:
Upload Gerber File(Gerber file, PCB file, Other)
Pricing & Build Time
Build Time
Qty
Total
{{calcprice.deliverytime}}
1 is single panel, 2 is double-sided panel, 4 is 4-layer panel, and 6 is 6-layer panel. The more layers, the more complex the manufacturing process and the higher the cost. Note:1. In order to improve the production efficiency, the template is basically produced by splicing. Some single panels will be spliced together with the double-sided panels, so there will be copper in the hole, which has no impact on the performance and has higher reliability< Br>2. For a single panel batch order, there is no copper in the hole. If there is copper in the hole, the order should be placed according to the double-sided panel< Br>3. When designing a single panel, many design engineers will reverse the lines or characters. Please make sure that they are correct before you put the board into production.
{{this.ordercount}}
$ {{calcprice.totalfee}}
*Delivery Information:
*Country:
*City:
*Address:
*Consignee:
*Tel:
Final price is subject to our review.
SMD Fee:
$ {{stencilmoney}}
Shipping Cost:
CN $ {{shippingcost}}
{{expresscompany.companyname}}
Wt:{{totalweight}}kg
Current Time (GMT+8):
Shipment Date: {{shipmentdate}}
$ {{totalamount}}
Raw Material
{{materialname}}
Solder Mask
{{soldercolorname}}
Board Type
{{board_type}}
Silkscreen
{{charcolorname}}
Layers
{{layername}}
Surface Finish
{{sprayingname}}
Size
{{boardlong}}*{{boardwidth}}
Via process
{{coveragename}}
Quantity
{{ordercount}}
E-test
{{testtypename}}
Subtotal Square Meter
{{pcb_boardarea}}㎡
Finish Copper
{{outercoppername}}
Different Design in Panel
{{pasteupnumber}}
Inner Copper
{{innercoppername}}
Thickness
{{thicknessname}}
TG request
{{conductionname}}
Min Track/Spacing
{{linewidthname}}
Voltage resistance Value
{{withstandname}}
Hole Size
{{impedancename}}
Finish Report
{{reportfilename}}
SMD Stencil
{{stencilneed}}
